2007-04-20 1 bcv62 pnp silicon double transistor ? to be used as a current mirror ? good thermal coupling and v be matching ? high current gain ? low collector-emitter saturation voltage ? pb-free (rohs compliant) package 1) ? qualified according aec q101 1 2 3 4 eha00013 c2 (1) tr.2 tr.1 c1 (2) e1 (3) e2 (4) type marking pin configuration package bcv62a bcv62b bcv62c 3js 3ks 3ls 1 = c2 1 = c2 1 = c2 2 = c1 2 = c1 2 = c1 3 = e1 3 = e1 3 = e1 4 = e2 4 = e2 4 = e2 sot143 sot143 sot143 maximum ratings parameter symbol value unit collector-emitter voltage (transistor t1) v ceo 30 v collector-base voltage (open emitter) (transistor t1) v cbo 30 emitter-base voltage v ebs 6 dc collector current i c 100 ma peak collector current i cm 200 base peak current (transistor t1) i bm 200 total power dissipation, t s = 99 c p tot 300 mw junction temperature t j 150 c storage temperature t stg -65 ... 150 thermal resistance junction - soldering point 2) r thjs 170 k/w 1 pb-containing package may be available upon special request 2 for calculation of r thja please refer to application note thermal resistance
2007-04-20 2 bcv62 electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics of t1 collector-emitter breakdown voltage i c = 10 ma, i b = 0 v (br)ceo 30 - - v collector-base breakdown voltage i c = 10 a, i e = 0 v (br)cbo 30 - - emitter-base breakdown voltage i e = 10 a, i c = 0 v (br)ebo 6 - - collector cutoff current v cb = 30 v, i e = 0 i cbo - - 15 na collector cutoff current v cb = 30 v, i e = 0 , t a = 150 c i cbo - - 5 a dc current gain 1) i c = 0.1 ma, v ce = 5 v h fe 100 - - - dc current gain 1) i c = 2 ma, v ce = 5 v h fe 125 220 420 180 290 520 220 475 800 collector-emitter saturation voltage1) i c = 10 ma, i b = 0.5 ma i c = 100 ma, i b = 5 ma v cesat - - 75 250 300 650 mv base-emitter saturation voltage 1) i c = 10 ma, i b = 0.5 ma i c = 100 ma, i b = 5 ma v besat - - 700 850 - - base-emitter voltage 1) i c = 2 ma, v ce = 5 v i c = 10 ma, v ce = 5 v v be(on) 600 - 650 - 750 820 bcv62a bcv62b bcv62c 1) pulse test: t 300 s, d = 2%
2007-04-20 3 bcv62 electrical characteristics at t a = 25c, unless otherwise specified. parameter symbol values unit min. typ. max. dc characteristics base-emitter forward voltage i e = 10 a i e = 250 ma v bes 0.4 - - - - 1.8 v matching of transistor t1 and transistor t2 at i e2 = 0.5ma and v ce1 = 5v t a = 25 c t a = 150 c i c1 / i c2 - 0.7 0.7 - - - - 1.3 1.3 - thermal coupling of transistor t1 and transistor t2 1) t1: v ce = 5v maximum current of thermal stability of i c1 i e2 - 5 - ma ac characteristics of transistor t1 transition frequency i c = 10 ma, v ce = 5 v, f = 100 mhz f t - 250 - mhz collector-base capacitance v cb = 10 v, f = 1 mhz c cb - 1.5 - pf emitter-base capacitance v eb = 0.5 v, f = 1 mhz c eb - 8 - noise figure i c = 200 a, v ce = 5 v, r s = 2 k ? , f = 1 khz, ? f = 200 hz f - 2 - db short-circuit input impedance i c = 1 ma, v ce = 10 v, f = 1 khz h 11e - 4.5 - k ? open-circuit reverse voltage transf.ratio i c = 1 ma, v ce = 10 v, f = 1 khz h 12e - 2 - 10 -4 short-circuit forward current transf.ratio i c = 1 ma, v ce = 10 v, f = 1 khz h 21e 100 - 900 - open-circuit output admittance i c = 1 ma, v ce = 10 v, f = 1 khz h 22e - 30 - s 1) witout emitter resistor. device mounted on alumina 15mm x 16.5mm x 0.7mm
2007-04-20 4 bcv62 test circuit for current matching c1 ce1 v a ... co v e2 ehn00003 = constant v co t2 t1 21 4 3 note: voltage drop at contacts: v co < 2/3 v t = 16mv characteristic for determination of v ce1 at specified r e range with i e2 as parameter under condition of i c1 / i e2 = 1.3 ehn00004 t1 t2 ... a 21 4 3 v ce1 c1 e2 = constant r e r e note: bcv62 with emitter resistors
2007-04-20 5 bcv62 collector-base capacitance c cb = ? ( v cb ) emitter-base capacitance c eb = ? ( v eb ) 0 4 8 12 16 v 22 v cb ( v eb ) 0 1 2 3 4 5 6 7 8 9 10 pf 12 c cb ( c eb ) ccb ceb total power dissipation p tot = f ( t s ) 0 15 30 45 60 75 90 105 120 c 150 t s 0 50 100 150 200 250 mw 350 p tot permissible pulse load p totmax / p totdc = f ( t p ) 10 ehp00941 bcv 62 -6 0 10 5 d = 5 10 1 5 10 2 3 10 10 -5 10 -4 10 -3 10 -2 10 0 s 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 tot max tot p dc p p t t p = d t t p t
2007-04-20 6 bcv62 package sot143 package outline foot print marking layout (example) standard packing reel ?180 mm = 3.000 pieces/reel reel ?330 mm = 10.000 pieces/reel rf s 2005, june date code (ym) bfp181 type code 56 pin 1 0.8 0.8 1.2 0.9 1.1 0.9 1.2 0.8 0.8 0.8 -0.05 +0.1 1.9 1.7 0.1 2.9 +0.1 -0.05 0.4 0.1 max. 12 3 4 0.25 m b 0.1 1 10? max. 0.15 min. 0.2 a m 2.4 0.15 0.2 10? max. a 1.3 0.1 0...8? 0.08...0.15 2.6 4 3.15 pin 1 8 0.2 1.15 b manufacturer
2007-04-20 7 bcv62 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2006. all rights reserved. attention please! the information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
